Hot Plates, Damp Nights and What the Tog Never Measured.

A white British wool duvet thrown back on a bed in a sunlit cottage bedroom

In 1946, Britain measured things.

The country had just come through a war run on arithmetic — rations, fuel, how little a person could manage on — and came out the other side with a national appetite for putting a number to everything.

That year, two men at the Shirley Institute in Manchester gave us one more. F. T. Peirce and W. H. Rees wanted a scale of warmth that came out in small whole numbers rather than awkward decimals, so that, in their words, practical clothing "may be described conveniently by a range of small integers".

They called it the "tog". They had clothing in mind. Bedding borrowed it later.

Eighty years on, the tog is on the label of almost every duvet in Britain. Not on ours. We will come to why.

Togs Are Good

The tog is not marketing. One tog is 0.1 square metres kelvin per watt. There is a British Standard for the apparatus, BS 4745, and another for duvets, BS 5335. A sample goes flat on a heated plate, heat is pushed through the sample of duvet, and the resistance (thermal insulation) is measured.

It is a real measurement, taken properly, by people being careful.

And it is taken dry.

You Are Not a Plate

You're not flat. You're not dry. And your duvet won't be new for long.

The labs say so themselves. IDFL, who test this for a living, put it simply: a tog rating is "at best only a rough guide to how warm you'll be".

And what wakes people at three in the morning is seldom the heat on its own.

It is the damp.

A white wool duvet airing on a washing line in the sun, outside a stone cottage

The Measurement Nobody Prints

The industry does have a number for that. Water vapour resistance, or Ret, read on a sweating guarded hotplate under ISO 11092. It is a separate property from warmth, with a separate test, and a duvet can do well on one and badly on the other.

Almost nobody publishes Ret for a duvet.

Everybody publishes tog. We do too, after a fashion.

Which Is Where Wool Loses Out

Wool takes up moisture as vapour — Woolmark put it at up to 35% of its own weight before it feels wet — and gives off heat while it does. Then wool lets the moisture go again, rather than holding it against you. That is what steadies the environment under the duvet as the room and your body cool at four in the morning.

A dry plate can't see a bit of it. So a wool duvet and a polyester one at the same tog will test the same.

But they will sleep quite differently.

What We Have Changed

We have stopped giving our own duvets a single tog figure.

Our summer weight is a 3 to 6 tog duvet. Our spring and autumn weight is a 6 to 11.

Not because we are unsure of the measurement. But because the right answer is the spread. It is the band of nights each one stays comfortable across, and a single figure would hide that.

Close-up of the quilting and loft of a white British wool duvet

What We Can't Prove

Our filling is picked for the crimp in the fibre, combed into layers so fine they are close to translucent, and laid one across another rather than blown in. That is what gives our duvets their loft and why they keep it.

We think it gives them more loft for their weight than most, and that a togmeter would not credit it.

That's a judgement from handling them. It's not a lab result, and we're not dressing it up as one.

Twenty Years of Selling Warmth

Buy a duvet on its tog and you are buying one property. Measured dry. On a flat plate. When it was new.

Wool is bought for the other thing.

Comfort. The breathing. The buffering. The not waking at three.

None of which comes with a number on the label — because none of it was ever what the tog measured.

Drop the tog and sleep better with wool.

Harry Mayman
Cofounder. The Wool Company

Our two weights:


Tog Ratings: What We Get Asked

What is a tog rating?

A measure of thermal resistance — how well something slows heat passing through it. One tog equals 0.1 square metres kelvin per watt. The higher the number, the more it resists heat escaping, so the warmer the duvet should feel.

Is tog an official standard, or just a marketing number?

It is a genuine unit with a British Standard behind it. The scale was devised at the Shirley Institute in Manchester in 1946. BS 4745 sets out the method used to measure thermal resistance in textiles, and BS 5335 covers duvets specifically.

How is a duvet's tog rating measured?

A sample of the duvet is laid flat on a togmeter, between a heated plate and a cooler one. Heat is passed through, the temperature difference and the heat flow are recorded, and the thermal resistance is calculated from them. It is a dry, steady-state test on a flat, new sample.

Does a higher tog always mean a warmer duvet?

It means more resistance to dry heat loss, which is not the same as feeling warmer in bed. How the duvet drapes, what the filling does with moisture, and how much loft it keeps after a year all affect how warm you actually are. Two duvets of the same tog can sleep very differently.

What tog should I choose?

The usual British convention is roughly 4.5 tog or less for summer, somewhere around 9 to 10.5 for spring and autumn, and 13.5 for winter. Treat it as a convention rather than a rule: a cold bedroom, a warm sleeper or a wool filling will each move the answer.

Does tog measure breathability?

No. Breathability has its own measurement — water vapour resistance, or Ret, taken under ISO 11092 on a sweating guarded hotplate. It is a separate property from thermal resistance, measured in a separate test, and a material can do well on one and badly on the other. Duvets are almost never sold on Ret, which is why tog carries more weight than it deserves.

Why do you give a tog range instead of a single figure?

Because a range describes a wool duvet more honestly. A single figure comes off a dry, flat laboratory plate and says nothing about moisture, which is where wool does most of its work. Our summer weight is a 3 to 6 tog duvet and our spring and autumn weight a 6 to 11. The spread is not uncertainty about the measurement — it is the band of nights each duvet stays comfortable across.

Why do wool duvets feel comfortable across a wider range of temperatures than their tog suggests?

Because wool manages moisture as well as heat. It absorbs water vapour — Woolmark gives up to 35% of its weight before it feels wet — and gives off heat as it does so, which buffers the change when a room cools overnight. A tog test is run dry, so none of that appears in the number.

Is fill weight in gsm a better guide than tog?

It is a different guide, and the two are worth reading together. Grams per square metre tells you how much filling is there; tog tells you how much heat it resists. Neither captures loft, and loft is what holds the still air that does the insulating. A lofty filling can out-perform a denser one of the same weight.

Does a duvet lose its tog rating over time?

The rating is taken when the duvet is new, and insulation falls as the filling compresses and loses loft — faster in a poor filling, and faster again with repeated washing. A duvet that keeps its loft keeps more of its warmth, which is one reason we suggest airing a wool duvet rather than washing it.

What is the difference between tog and clo?

They measure the same property on different scales. Clo came first, proposed in the United States in 1941 for clothing; one clo is about 1.55 tog. Tog is the one used for British bedding.

More Posts

0 comments

Leave a comment

All blog comments are checked prior to publishing